CentOS 7.4 установка PostgreSQL от postgrepro.ru

CentOS 7.5 1С:Предприятие 8.3.13.1513 PostgreSQL, версия 10.3-3.1C 
Установка CentOS 7.4.1708
CentOS-7-x86_64-NetInstall-1708.iso
Репозитарий
http://mirror.yandex.ru/centos/7.4.1708/os/x86_64/

Не забыть включить сеть!
Узнать сетевой адрес
$ ip addr
Зайдем с помощью MobaXterm по ssh
$ sudo yum -y update
$ sudo yum -y install epel-release
$ sudo yum -y install nano mc wget ssh
$ sudo yum -y install net-tools

Настройка сети
Сетевые настройки в CentOS 7

Узнать имя адаптера
$ ip addr

В примере "enp0s3"
 
Для "enp0s3"
!!!$ sudo nano /etc/sysconfig/network-scripts/ifcfg-eth0
 $ sudo nano /etc/sysconfig/network-scripts/ifcfg-enp0s3

 Отредактировать:

TYPE="Ethernet"
PROXY_METHOD="none"
DNS1="192.168.0.1"
IPADDR0="192.168.0.62"
PREFIX0=24
GATEWAY0="192.168.0.1"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="no"

NAME="enp0s3"
UUID="4618daee-efba-4ae1-97ad-c1dcc03078dc"
DEVICE="enp0s3"
ONBOOT="yes"

Сохранить.

$ netstat -tulnp

Посмотрим, что использует ip6

Отключим ip6

$ sudo nano /etc/sysctl.conf

Добавим в конец:

net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1

Сохранить.



$ sudo nano /etc/hostname

Изменить имя

centos

Сохранить.

Вписываем имя хоста (centos) в /etc/hosts:
$ sudo cp /etc/hosts /etc/host.bak

$ sudo nano /etc/hosts

Изменить:

127.0.0.1   localhost
192.168.0.62 centos

Сохранить.

Вписываем (проверяем) имя хоста в /etc/sysconfig/network:

$ sudo nano /etc/sysconfig/network

NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=centos

Сохранить.
$ sudo service network restart
$ ping centos

Настроим netbios name centos

$ sudo yum -y install samba samba-client samba-common
$ sudo cp /etc/samba/smb.conf /etc/samba/smb.conf.bak
$ sudo nano /etc/samba/smb.conf

Вносим изменения:

[global]
        workgroup = WORKGROUP
        server string = Samba Server %v
        netbios name = centos
        security = user
        map to guest = bad user
        dns proxy = no
        passdb backend = tdbsam
        printing = cups
        printcap name = cups
        load printers = yes
        cups options = raw

Добавляем:

[files]
        path = /files
        browsable =yes
        writable = yes
        guest ok = yes
        read only = no

Сохраняем.

Перезапускаем службы:

$ sudo mkdir -p /files
$ sudo chmod -R 2777 /files

$ sudo systemctl enable smb.service
$ sudo systemctl enable nmb.service
$ sudo systemctl restart smb.service
$ sudo systemctl restart nmb.service

!!!Откроем сетевой экран:
!!!# firewall-cmd --permanent --zone=public --add-service=samba
!!!# firewall-cmd --reload

Наша цель что бы сервер откликался по имени, детальная настройка samba по ссылке:
Анонимный доступ средствами samba

Отключить firewall centos 7
Отключаем файрволл (сервер внутри сети, в угоду простоте не будем заморачиваться):
$ sudo systemctl status firewalld
$ sudo systemctl stop firewalld
$ sudo systemctl disable firewalld

Отключаем SELinux — в файле /etc/sysconfig/selinux присваиваем параметру SELINUX флаг disabled:
$ sudo nano /etc/sysconfig/selinux
SELINUX=disabled
Сохранить.
$ sudo poweroff
Создаем образ centos.ova (существующий образ без выделенного красным)

Зайдем с помощью MobaXterm по ssh

Установим PostgreSQL
sudo rpm -ivh http://1c.postgrespro.ru/keys/postgrespro-1c-centos96.noarch.rpm && sudo yum makecache && sudo yum install postgresql-pro-1c-9.6

$ sudo su - postgres
-bash-4.2$  /usr/pgsql-9.6/bin/initdb -D /var/lib/pgsql/9.6/data --locale=ru_RU.UTF-8
-bash-4.2$ /usr/pgsql-9.6/bin/pg_ctl -D /var/lib/pgsql/9.6/data -l logfile start
-bash-4.2$ /usr/pgsql-9.6/bin/psql
postgres=# ALTER USER postgres WITH PASSWORD 'pass'
Нажать Ctrl +  D
postgres=# \q
-bash-4.2$ psql -l

Нажать Ctrl +  D
или
-bash-4.2$ exit

$ sudo reboot

$ sudo service postgresql-9.6 start
$ sudo chkconfig postgresql-9.6 on
$ sudo service postgresql-9.6 status

$ netstat -tunpl | grep 5432

Добавляем необходимые шрифты и прочие утилиты:

Get Microsoft's Core Fonts for the Web and Cleartype Fonts

$ sudo yum -y install xorg-x11-fonts-Type1 xorg-x11-fonts-truetype
$ sudo yum install -y curl cabextract xorg-x11-font-utils fontconfig
$ sudo rpm -i https://downloads.sourceforge.net/project/mscorefonts2/rpms/msttcore-fonts-installer-2.6-1.noarch.rpm

 Для 1с
$ sudo yum -y install ImageMagick glib2-devel unixODBC libmspack
$ sudo yum -y install libgsf
Используя  samba положим 8.3.10.2650  в /files

$ cd /files$ tar xvzf server.rpm64.tar.gz
$ sudo yum localinstall *.rpm
$ sudo chown -R usr1cv8:grp1cv8 /opt/1C
Зададим пароль pass
$ sudo passwd usr1cv8
Запустим сервер
$ sudo service srv1cv83 start
$ sudo chkconfig srv1cv83 on

Чтобы сервер srv1cv83 автозагружался:
$ sudo nano /etc/init.d/srv1cv83

Добавим в начало строчку:
#!/bin/sh

Сохранить.
$ sudo reboot

$ sudo service srv1cv83 status
$ sudo netstat -tlnp | grep :15

Должно быть так:

Если сервер всеже не будет загружаться:
$ sudo rm -R /home/usr1cv8/.1cv8
$ sudo reboot
 
$ sudo poweroff
Создаем образ cpost.ova

Копировать postgresql.conf
$ sudo cp /var/lib/pgsql/9.6/data/postgresql.conf  /var/lib/pgsql/9.6/data/postgresql.conf.bak
!!!sudo cp /var/lib/pgsql/9.6/data/postgresql.conf.bak  /var/lib/pgsql/9.6/data/postgresql.conf
$ sudo cp /var/lib/pgsql/9.6/data/postgresql.conf  /var/lib/pgsql/9.6/data/postgresql.conf.bak-1

Пример  postgresql.conf  для 32 Gb RAM
$ sudo nano /var/lib/pgsql/9.6/data/postgresql.conf

Заменить:

#----------------------------------------------------------------------
listen_addresses = '*'        # what IP address(es) to listen on;
dynamic_shared_memory_type = posix    # the default is the first option
log_destination = 'stderr'        # Valid values are combinations of
log_rotation_age = 1d            # Automatic rotation of logfiles will
datestyle = 'iso, dmy'
timezone = 'W-SU'
lc_messages = 'ru_RU.UTF-8'            # locale for system error message
lc_monetary = 'ru_RU.UTF-8'            # locale for monetary formatting
lc_numeric = 'ru_RU.UTF-8'            # locale for number formatting
lc_time = 'ru_RU.UTF-8'                # locale for time formatting
default_text_search_config = 'pg_catalog.russian'
#----------------------------------------------------------------------
effective_cache_size = '12288MB'
work_mem = '32MB'
shared_buffers = '12288MB'
maintenance_work_mem = '512MB'
temp_buffers = '32MB'
#temp_tablespaces = 'user_temp'
max_files_per_process = '24576'
autovacuum_max_workers = '4'
autovacuum_analyze_scale_factor = '0.01'
autovacuum_vacuum_scale_factor = '0.02'
random_page_cost = '1.5'
log_statement = 'none'
#----------------------------------------------------------------------
log_filename = 'postgresql-%Y-%m-%d.log'
log_rotation_size = '0'
log_timezone = 'W-SU'
log_truncate_on_rotation = 'on'
logging_collector = 'on'

shared_preload_libraries = 'online_analyze, plantuner, auto_explain'

online_analyze.enable = off
online_analyze.verbose = off
online_analyze.table_type = 'temporary'
online_analyze.scale_factor = 0.3
online_analyze.min_interval = 10000
online_analyze.threshold = 500
online_analyze.local_tracking = on


cpu_operator_cost = 0.0005
plantuner.fix_empty_table = on

autovacuum_naptime = '20' # s
#autovacuum_analyze_threshold = 20

bgwriter_delay = '10' # ms
bgwriter_lru_maxpages = '800'
bgwriter_lru_multiplier = '8'

# storage specific
effective_io_concurrency = '2'
random_page_cost = '2'

checkpoint_completion_target = 0.9
#checkpoint_segments = '128'
max_connections = '1000'

synchronous_commit = 'off'
commit_delay = '1000'

# 1C specific
escape_string_warning = 'off'
standard_conforming_strings = 'off'
max_locks_per_transaction = '256'
#work_mem = 65536

# pgbadger

log_directory = 'pg_log'
#log_directory = '/var/log/pgsql'
#log_filename = 'postgresql.log'
log_min_duration_statement = 0s
log_autovacuum_min_duration = 0
log_line_prefix = '%t [%p]: [%l-1] user=%u,db=%d,app=%a,client=%h '
log_checkpoints = on
log_connections = on
log_disconnections = on
log_lock_waits = on
log_temp_files = 0

# backup
max_wal_senders = 4
wal_level = hot_standby
wal_keep_segments = 1024
#----------------------------------------------------------------------

Сохранить.

$ sudo reboot
 

Debian Общая папка

Создаем папку, которую сделаем доступной для виндовых клиентов.

$ sudo mkdir -p /files
$ sudo chmod -R 2777 /files
$ sudo chown -R root:sambashare /files

Сохраняем конфигурацию samba

  $ sudo cp -b -f /etc/samba/smb.conf /etc/samba/smb.conf.bak

Восстановить # cp -b -f /etc/samba/smb.conf.bak /etc/samba/smb.conf


Отредактируем конфигурационный файл:

 $ sudo nano /etc/samba/smb.conf

Добавить в конец

[files]
path = /files/
comment = No comment
read only = no
available = yes
browseable = yes
writable = yes
guest ok = yes
public = yes
printable = no
locking = no
strict locking = no

Сохранить
Перезагрузить службу

$ sudo service smbd restart 

Debian 9.3.0 установка postgrespro.ru и 1С

На Debian PostgreSQL от 1с не устанавливается, установим PostgreSQL 9.6.6 от postgrespro.ru

$ sudo dpkg-reconfigure locales

Данная команда вызывает утилиту при помощи которой следует выбрать локали en_US ISO-8859-1, en_US.UTF-8 и ru_RU.UTF-8

 

$ sudo dpkg-reconfigure locales
[sudo] пароль для user:
Generating locales (this might take a while)...
  en_US.ISO-8859-1... done
  en_US.UTF-8... done
  ru_RU.UTF-8... done
Generation complete.

$ nano install_post966_deb.sh

Скопируем из буфера следующий скрипт:

#!/bin/sh
sudo sh -c 'echo "deb http://1c.postgrespro.ru/deb/ $(lsb_release -cs) main" > /etc/apt/sources.list.d/postgrespro-1c.list'
wget --no-verbose -O - http://1c.postgrespro.ru/keys/GPG-KEY-POSTGRESPRO-1C | sudo apt-key add - && sudo apt-get update
sudo apt-get install -y postgresql-pro-1c-9.6
sudo -u postgres psql -U postgres -c "alter user postgres with password 'pass';"
sudo cp /etc/postgresql/9.6/main/postgresql.conf /etc/postgresql/9.6/main/postgresql.conf.bak
# установка 1с
mkdir -p /tmp/1ctmp
cd /tmp/1ctmp
sudo apt install -y unixodbc libgsf-1-114 libglib2.0
#ubuntu
#sudo apt install ttf-mscorefonts-installer -y
#debian
#wget  http://ftp.ru.debian.org/debian/pool/contrib/m/msttcorefonts/ttf-mscorefonts-installer_3.6_all.deb
sudo  apt install -y xfonts-utils cabextract
#sudo dpkg -i ttf-mscorefonts-installer_3.6_all.deb
# фонты от Etersoft
#ubuntu
#cp /home/user/test/fonts-ttf-ms_1.0-eter4ubuntu_all.deb /tmp/1ctmp
#sudo dpkg -i fonts-ttf-ms_1.0-eter4ubuntu_all.deb
#sudo apt -f -y install
#debian
cp /home/user/test/fonts-ttf-ms_1.0-eter4debian_all.deb /tmp/1ctmp
sudo dpkg -i fonts-ttf-ms_1.0-eter4debian_all.deb
sudo apt -f -y install
cp /home/user/test/server.deb64.tar.gz /tmp/1ctmp
cp /home/user/test/client.deb64.tar.gz /tmp/1ctmp
tar xvzf server.deb64.tar.gz
tar xvzf client.deb64.tar.gz
sudo dpkg -i 1c*.deb
sudo apt -f -y install
sudo chown -R usr1cv8:grp1cv8 /opt/1C
sudo echo -e "pass\npass\n" | sudo passwd usr1cv8
sudo service srv1cv83 start
#sudo service srv1cv83 status
sudo  apt install -y libc6-i386
mkdir /tmp/hasp
cd /tmp/hasp
cp /home/user/test/haspd_7.60-eter1debian_amd64.deb /tmp/hasp
cp /home/user/test/haspd-modules_7.60-eter1debian_amd64.deb /tmp/hasp
#cp /home/user/test/haspd_7.40-eter10ubuntu_amd64.deb /tmp/hasp
#cp /home/user/test/haspd-modules_7.40-eter10ubuntu_amd64.deb /tmp/hasp
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Debian/8/haspd_7.60-eter1debian_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Ubuntu/16.04/haspd_7.40-eter10ubuntu_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Debian/8/haspd-modules_7.60-eter1debian_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Ubuntu/16.04/haspd-modules_7.40-eter10ubuntu_amd64.deb
sudo dpkg -i *.deb
sudo apt-get install -f -y
sudo service haspd start
#sudo service haspd status
#sudo shutdown -r now

Сохраним файл install_post966_deb.sh

Сделаем исполняем
$ chmod +x  install_post966_deb.sh

Выполним:

$ ./install_post966_deb.sh

Хотя скрипт все правильно делает, рассмотрим, как проверить запуск серверов PostgreSQL и 1С.

$ sudo systemctl status postgresql.service

$ sudo ss -tunpl | grep 5432

$ sudo systemctl status srv1cv83.service

или так:

$ sudo service srv1cv83 status

 $ sudo ss -tlnp | grep :15

Копировать postgresql.conf
$ sudo cp /etc/postgresql/9.6/main/postgresql.conf /etc/postgresql/9.6/main/postgresql.conf.bak

Восстановить postgresql.conf
$ sudo cp /etc/postgresql/9.6/main/postgresql.conf.bak /etc/postgresql/9.6/main/postgresql.conf

Редактировать postgresql.conf
$ sudo cp /etc/postgresql/9.6/main/postgresql.conf /etc/postgresql/9.6/main/postgresql.conf.bak-1

$ sudo nano  /etc/postgresql/9.6/main/postgresql.conf

Заменить:

#---------------------------------------------------------------------- 
data_directory = '/var/lib/postgresql/9.6/main'        # use data in another directory
hba_file = '/etc/postgresql/9.6/main/pg_hba.conf'    # host-based authentication file
ident_file = '/etc/postgresql/9.6/main/pg_ident.conf'    # ident configuration file
external_pid_file = '/var/run/postgresql/9.6-main.pid'            # write an extra PID file
listen_addresses = '*'        # what IP address(es) to listen on;
port = 5432                # (change requires restart)
max_connections = 100            # (change requires restart)
unix_socket_directories = '/var/run/postgresql'    # comma-separated list of directories
ssl = false                # (change requires restart)
ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'        # (change requires restart)
ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'        # (change requires restart)
dynamic_shared_memory_type = posix    # the default is the first option
log_timezone = 'W-SU'cluster_name = '9.6/main'            # added to process titles if nonempty
stats_temp_directory = '/var/run/postgresql/9.6-main.pg_stat_tmp'
datestyle = 'iso, dmy'
timezone = 'W-SU'
lc_messages = 'ru_RU.UTF-8'            # locale for system error message
lc_monetary = 'ru_RU.UTF-8'            # locale for monetary formatting
lc_numeric = 'ru_RU.UTF-8'            # locale for number formatting
lc_time = 'ru_RU.UTF-8'                # locale for time formatting
default_text_search_config = 'pg_catalog.russian'
#----------------------------------------------------------------------effective_cache_size = '12288MB'
work_mem = '32MB'
shared_buffers = '12288MB'
maintenance_work_mem = '512MB'
temp_buffers = '32MB'
#temp_tablespaces = 'user_temp'
max_files_per_process = '24576'
autovacuum_max_workers = '4'
autovacuum_analyze_scale_factor = '0.01'
autovacuum_vacuum_scale_factor = '0.02'
random_page_cost = '1.5'
log_statement = 'none'
#----------------------------------------------------------------------
log_filename = 'postgresql-%Y-%m-%d.log'
log_rotation_size = '0'
log_timezone = 'W-SU'
log_truncate_on_rotation = 'on'
logging_collector = 'on'

shared_preload_libraries = 'online_analyze, plantuner, auto_explain'

online_analyze.enable = off
online_analyze.verbose = off
online_analyze.table_type = 'temporary'
online_analyze.scale_factor = 0.3
online_analyze.min_interval = 10000
online_analyze.threshold = 500
online_analyze.local_tracking = on


cpu_operator_cost = 0.0005
plantuner.fix_empty_table = on

autovacuum_naptime = '20' # s
#autovacuum_analyze_threshold = 20

bgwriter_delay = '10' # ms
bgwriter_lru_maxpages = '800'
bgwriter_lru_multiplier = '8'

# storage specific
effective_io_concurrency = '2'
random_page_cost = '2'

checkpoint_completion_target = 0.9
#checkpoint_segments = '128'
max_connections = '1000'

synchronous_commit = 'off'
commit_delay = '1000'

# 1C specific
escape_string_warning = 'off'
standard_conforming_strings = 'off'
max_locks_per_transaction = '256'
#work_mem = 65536

# pgbadger

log_directory = 'pg_log'
#log_directory = '/var/log/pgsql'
#log_filename = 'postgresql.log'
log_min_duration_statement = 0s
log_autovacuum_min_duration = 0
log_line_prefix = '%t [%p]: [%l-1] user=%u,db=%d,app=%a,client=%h '
log_checkpoints = on
log_connections = on
log_disconnections = on
log_lock_waits = on
log_temp_files = 0

# backup
max_wal_senders = 4
wal_level = hot_standby
wal_keep_segments = 1024
#---------------------------------------------------------------------- 

 Сохранить.

$ sudo reboot

Debian 9.3.0 скрипт замены hostname и ip

$ nano net.sh

Скопируем из буфера следующий скрипт, в котором Вам нужно исправить ip и адрес шлюза в соответствии со своей сетью:

#!/bin/bash
# замена ip & name
#----------------------------------------------------------------------
_hostname="client"
# real computer
#_iface="enp0s31f6"
# kvm iface
#_iface="ens3"
# virtualbox iface
_iface="enp0s3"
#_address="10.0.2.15"
_address="192.168.0.199"
#_gateway="10.0.2.2"
_gateway="192.168.0.1"
_netmask="255.255.255.0"
_nameserver="8.8.8.8"
#----------------------------------------------------------------------
# настроим статический ip
sudo cat > /tmp/interfaces <<EOF
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#auto $_iface
#iface $_iface inet dhcp
iface $_iface inet static
address $_address
netmask $_netmask
gateway $_gateway
#dns-nameservers $_nameserver
auto $_iface
EOF
sudo cp /tmp/interfaces /etc/network
sudo rm /etc/resolv.conf
sudo /bin/su -c "echo 'nameserver $_nameserver' > /etc/resolv.conf"
# изменим hostname и ip
sudo cat > /tmp/hosts <<EOF
127.0.0.1       localhost
$_address       $_hostname
EOF
sudo cp /tmp/hosts /etc
# изменим hostname
sudo hostname $_hostname
sudo /bin/su -c "echo $_hostname > /etc/hostname"
# перезагрузим сеть
sudo systemctl restart networking.service

Сохраним файл net.sh

Сделаем исполняем
$ chmod +x  net.sh

Выполним:

$ ./net.sh

Перезагрузимся

$ sudo reboot

Debian 9.3.0 установка 1С 8.3.11

$ nano install1c.sh

Скопируем из буфера следующий скрипт:

#!/bin/sh
# установка 1с
mkdir -p /tmp/1ctmp
cd /tmp/1ctmp
sudo apt install -y unixodbc libgsf-1-114 libglib2.0
#ubuntu
#sudo apt install ttf-mscorefonts-installer -y
#debian
#wget  http://ftp.ru.debian.org/debian/pool/contrib/m/msttcorefonts/ttf-mscorefonts-installer_3.6_all.deb
sudo  apt install -y xfonts-utils cabextract
#sudo dpkg -i ttf-mscorefonts-installer_3.6_all.deb
# фонты от Etersoft
#ubuntu
#cp /home/user/test/fonts-ttf-ms_1.0-eter4ubuntu_all.deb /tmp/1ctmp
#sudo dpkg -i fonts-ttf-ms_1.0-eter4ubuntu_all.deb
#sudo apt -f -y install
#debian
cp /home/user/test/fonts-ttf-ms_1.0-eter4debian_all.deb /tmp/1ctmp
sudo dpkg -i fonts-ttf-ms_1.0-eter4debian_all.deb
sudo apt -f -y install
cp /home/user/test/server.deb64.tar.gz /tmp/1ctmp
cp /home/user/test/client.deb64.tar.gz /tmp/1ctmp
tar xvzf server.deb64.tar.gz
tar xvzf client.deb64.tar.gz
sudo dpkg -i 1c*.deb
sudo apt -f -y install
#sudo chown -R usr1cv8:grp1cv8 /opt/1C
#sudo echo -e "pass\npass\n" | sudo passwd usr1cv8
sudo service srv1cv83 start
#sudo service srv1cv83 status
sudo  apt install -y libc6-i386
mkdir /tmp/hasp
cd /tmp/hasp
cp /home/user/test/haspd_7.60-eter1debian_amd64.deb /tmp/hasp
cp /home/user/test/haspd-modules_7.60-eter1debian_amd64.deb /tmp/hasp
#cp /home/user/test/haspd_7.40-eter10ubuntu_amd64.deb /tmp/hasp
#cp /home/user/test/haspd-modules_7.40-eter10ubuntu_amd64.deb /tmp/hasp
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Debian/8/haspd_7.60-eter1debian_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Ubuntu/16.04/haspd_7.40-eter10ubuntu_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Debian/8/haspd-modules_7.60-eter1debian_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Ubuntu/16.04/haspd-modules_7.40-eter10ubuntu_amd64.deb
sudo dpkg -i *.deb
sudo apt-get install -f -y
sudo service haspd start
Сохраним файл installdb2.sh

Сделаем исполняем
$ chmod +x install1c.sh
$ ./install1c.sh

Debian 9.3.0 установка db2 v11.1

Файлы необходимые для установки (предварительно нужно скачать по указанным в начале статьи ссылкам):

v11.1_linuxx64_expc.tar.gz
server.deb64.tar.gz
client.deb64.tar.gz
fonts-ttf-ms_1.0-eter4debian_all.deb
#fonts-ttf-ms_1.0-eter4ubuntu_all.deb
haspd_7.60-eter1debian_amd64.deb
haspd-modules_7.60-eter1debian_amd64.deb

Откроем firefox (в ubuntu), откроем эту страничку  и скопируем в буфер скрипт установки db2 и 1с:

$ nano installdb2.sh

Скопируем из буфера следующий скрипт:

#!/bin/sh
sudo groupadd db2iadm1
sudo useradd -g db2iadm1 -m -d /home/db2inst1 db2inst1
#passwd db2inst1
sudo echo -e "pass\npass\n" | sudo passwd db2inst1
sudo groupadd db2fadm1
sudo useradd -g db2fadm1 -m -d /home/db2fenc1 db2fenc1
#sudo passwd db2fenc1
sudo echo -e "pass\npass\n" | sudo passwd db2fenc1
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libpam0g:i386 -y
#sudo apt-get install libaio1 -y
sudo apt-get install libx32stdc++6 -y
#sudo apt-get install binutils -y
sudo apt-get install libnuma-dev -y
sudo apt-get install libstdc++6 -y
#sudo apt-get install libstdc++5 -y
sudo apt-get install ksh -y
#sudo apt-get install rpm -y
cp /home/user/test/v11.1_linuxx64_expc.tar.gz /tmp
cd /tmp
tar xvzf v11.1_linuxx64_expc.tar.gz
cd expc
sudo ./db2_install -f sysreq
#Не указан сервер SMTP уведомлений. Пока он не задан, нельзя послать уведомления
cd /opt/ibm/db2/V11.1/instance
#Create instance
sudo ./db2icrt -u db2fenc1 db2inst1
#Enable auto-start of the instance by running the following command as the instance owner:
sudo ./db2iauto -on db2inst1
#sudo -u db2inst1 /home/db2inst1/sqllib/adm/db2set DB2_WORKLOAD=1C
sudo su db2inst1 -c '. /home/db2inst1/sqllib/db2profile;/home/db2inst1/sqllib/adm/db2set DB2_WORKLOAD=1C'
# запуск db2 через rc.local
cd /tmp
cat > rc.local <<EOF
#!/bin/bash
# Не запускаю db2fm, плохо гаситься
cd /opt/ibm/db2/V11.1/bin/
#./db2fm -i db2inst1 -u -U
#./db2fm -i db2inst1 -s -S
# Запустим db2
sudo su db2inst1 -c '. /home/db2inst1/sqllib/db2profile;/home/db2inst1/sqllib/adm/db2start'
exit 0
EOF
sudo cp /tmp/rc.local /etc/
sudo chmod +x /etc/rc.local
#sudo systemctl daemon-reload
# скрипт выключения db2
cd /tmp
cat > db2exit.service <<EOF
[Unit]
Description=db2stop
[Service]
ExecStop=/bin/su db2inst1 -c '. /home/db2inst1/sqllib/db2profile;/home/db2inst1/sqllib/adm/db2stop force'
Type=oneshot
RemainAfterExit=yes
[Install]
WantedBy=multi-user.target reboot.target poweroff.target
EOF
sudo cp db2exit.service /lib/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable db2exit.service
#ps -eaf|grep -i db2sysc
#sudo -u db2inst1 /home/db2inst1/sqllib/adm/db2start
sudo su db2inst1 -c '. /home/db2inst1/sqllib/db2profile;/home/db2inst1/sqllib/adm/db2start'
cd /opt/ibm/db2/V11.1/bin/
#This step adds an entry to the /etc/inittab so that the FMCD process is started each time you reboot.
sudo ./db2fmcu -u -p /opt/ibm/db2/V11.1/bin/db2fmcd
#Turn on the fault monitor for the instance:
sudo  ./db2fm -i db2inst1 -f on
# установка 1с
mkdir -p /tmp/1ctmp
cd /tmp/1ctmp
sudo apt install -y unixodbc libgsf-1-114 libglib2.0
#ubuntu
#sudo apt install ttf-mscorefonts-installer -y
#debian
#wget  http://ftp.ru.debian.org/debian/pool/contrib/m/msttcorefonts/ttf-mscorefonts-installer_3.6_all.deb
sudo  apt install -y xfonts-utils cabextract
#sudo dpkg -i ttf-mscorefonts-installer_3.6_all.deb
# фонты от Etersoft
#ubuntu
#cp /home/user/test/fonts-ttf-ms_1.0-eter4ubuntu_all.deb /tmp/1ctmp
#sudo dpkg -i fonts-ttf-ms_1.0-eter4ubuntu_all.deb
#sudo apt -f -y install
#debian
cp /home/user/test/fonts-ttf-ms_1.0-eter4debian_all.deb /tmp/1ctmp
sudo dpkg -i fonts-ttf-ms_1.0-eter4debian_all.deb
sudo apt -f -y install
cp /home/user/test/server.deb64.tar.gz /tmp/1ctmp
cp /home/user/test/client.deb64.tar.gz /tmp/1ctmp
tar xvzf server.deb64.tar.gz
tar xvzf client.deb64.tar.gz
sudo dpkg -i 1c*.deb
sudo apt -f -y install
sudo chown -R usr1cv8:grp1cv8 /opt/1C
sudo echo -e "pass\npass\n" | sudo passwd usr1cv8
sudo usermod -aG db2iadm1 usr1cv8
#sudo echo ". /home/db2inst1/sqllib/db2profile" >> /home/usr1cv8/.profile
sudo sh -c "echo '. /home/db2inst1/sqllib/db2profile' >> /home/usr1cv8/.profile"
sudo service srv1cv83 start
#sudo service srv1cv83 status
sudo  apt install -y libc6-i386
mkdir /tmp/hasp
cd /tmp/hasp
cp /home/user/test/haspd_7.60-eter1debian_amd64.deb /tmp/hasp
cp /home/user/test/haspd-modules_7.60-eter1debian_amd64.deb /tmp/hasp
#cp /home/user/test/haspd_7.40-eter10ubuntu_amd64.deb /tmp/hasp
#cp /home/user/test/haspd-modules_7.40-eter10ubuntu_amd64.deb /tmp/hasp
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Debian/8/haspd_7.60-eter1debian_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Ubuntu/16.04/haspd_7.40-eter10ubuntu_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Debian/8/haspd-modules_7.60-eter1debian_amd64.deb
#wget http://download.etersoft.ru/pub/Etersoft/HASP/last/x86_64/Ubuntu/16.04/haspd-modules_7.40-eter10ubuntu_amd64.deb
sudo dpkg -i *.deb
sudo apt-get install -f -y
sudo service haspd start
sudo su db2inst1 -c '. /home/db2inst1/sqllib/db2profile;/home/db2inst1/sqllib/adm/db2stop'
#sudo service haspd status
#sudo shutdown -r now

Сохраним файл installdb2.sh

Сделаем исполняем
$ chmod +x  installdb2.sh

Перед запуском обратим внимание нужно будет 2 раза подтвердить "да" русскими буквами

Выполним:

$ ./installdb2.sh
$ sudo poweroff

 

Сохранение базы средствами db2

$ su - db2inst1
$ db2 backup db demo
Будет доступно только владельцу, узнаем как называется backup

$ ls
DEMO.0.db2inst1.DBPART000.20171107172851.001
$ chmod -R 777 DEMO.0.db2inst1.DBPART000.20171107172851.001

Теперь можно положить базу на ftp.



Восстановление базы средствами db2
$ su - db2inst1
$ db2 restore db demo

Если нужно сделать дополнительные базы:

Регистрация дополнительной базы "old" в основном экземпляре
Создадим базу средствами 1С:

$ su - db2inst1
Наша дополнительная база  называется old
$ db2 restart db old

Сохранение базы средствами db2
$ db2 backup db old

Debian 9.3.0 настройка сети

$ nano network.sh
Скопируем из буфера следующий скрипт:
#!/bin/bash
# настройка ip и hostname hname debian 9 на kvm
#----------------------------------------------------------------------
_hostname="deb930"
# real computer
#_iface="enp0s31f6"
# kvm iface
#_iface="ens3"
# virtualbox iface
_iface="enp0s3"
_address="192.168.0.166"
_gateway="192.168.0.1"
_netmask="255.255.255.0"
_nameserver="8.8.8.8"
#----------------------------------------------------------------------
# отключим сетевой менеджер
sudo systemctl stop NetworkManager
sudo systemctl disable NetworkManager
# настроим статический ip
sudo cat > /tmp/interfaces <<EOF
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#auto $_iface
#iface $_iface inet dhcp
iface $_iface inet static
address $_address
netmask $_netmask
gateway $_gateway
#dns-nameservers $_nameserver
auto $_iface
EOF
sudo cp /tmp/interfaces /etc/network
sudo rm /etc/resolv.conf
sudo /bin/su -c "echo 'nameserver $_nameserver' > /etc/resolv.conf"
# изменим hostname и ip
sudo cat > /tmp/hosts <<EOF
127.0.0.1       localhost
$_address       $_hostname
EOF
sudo cp /tmp/hosts /etc
# изменим hostname
sudo hostname $_hostname
sudo /bin/su -c "echo $_hostname > /etc/hostname"
# отключим ip6
sudo /bin/su -c "echo 'net.ipv6.conf.all.disable_ipv6 = 1' >> /etc/sysctl.conf"
sudo /bin/su -c "echo 'net.ipv6.conf.default.disable_ipv6 = 1' >> /etc/sysctl.conf"
sudo /bin/su -c "echo 'net.ipv6.conf.lo.disable_ipv6 = 1' >> /etc/sysctl.conf"
#sudo /bin/su -c "echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf"
sudo sysctl -p
# перезагрузим сеть
sudo systemctl start networking.service
sudo systemctl enable networking.service
# Настройка sudo journalctl -b sudo journalctl -b -1 sudo journalctl --list-boots
sudo sed -i 's/#Storage=auto/Storage=persistent/' /etc/systemd/journald.conf
# Настройка ftp пользователь: test пароль: test
sudo apt install pure-ftpd -y
sudo groupadd ftpgroup
sudo usermod -aG ftpgroup user
sudo ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/50pure
sudo mkdir /home/user/test
sudo chown -R user:ftpgroup /home/user/test
#sudo pure-pw useradd test -u user -d /home/user/test
# Заведем пользователя ftp test с паролем test
sudo echo -e "test\ntest\n" | sudo pure-pw useradd test -u user -d /home/user/test
sudo pure-pw mkdb
sudo service pure-ftpd restart
# ubuntu
# Отключим службу ondemand
# (для разгона cpu)
# cat /proc/cpuinfo | grep MHz
# systemctl status ondemand
# systemctl stop ondemand
# systemctl disable ondemand
# nano /etc/sysctl.conf
# shutdown -r now

Сохранить.
$ chmod +x network.sh
$ ./network.sh

Debian 9.3.0 xrdp

$ nano xrdp.sh
Скопируем из буфера следующий скрипт:
#!/bin/bash
################################################################
# Script_Name : start.sh
# Description : Perform an automated custom installation of xrdp
# on debian 9.1 xrdp-0.9.3.1 xorgxrdp-0.2.3 pulseaudio
# Date : August 2017
# written by : renbuar
# Web Site :http://renbuar.blogspot.ru/2017/08/pulse.html
# Version : 1.3
# Disclaimer : Script provided AS IS. Use it at your own risk....
##################################################################
##################################################################
#Step 1 - Install prereqs for compilation
##################################################################
echo "Installing prereqs for compiling xrdp..."
echo "----------------------------------------"
sudo apt install -y git autoconf libtool pkg-config gcc g++ make libssl-dev libpam0g-dev libjpeg-dev libx11-dev libxfixes-dev libxrandr-dev flex bison libxml2-dev intltool xsltproc xutils-dev python-libxml2 g++ xutils libfuse-dev libmp3lame-dev nasm libpixman-1-dev xserver-xorg-dev git
##################################################################
#Step 2 - Obtain xrdp packages
##################################################################
## --Go to your Download folder
echo "Moving to the /tmp folders..."
echo "-----------------------------------"
cd /tmp
## -- Download the xrdp latest files
echo "Ready to start the download of xrdp package"
echo "-------------------------------------------"
git clone git://github.com/neutrinolabs/xrdp
cd /tmp/xrdp
./bootstrap
./configure --enable-fuse --enable-mp3lame --enable-pixman --enable-sound --disable-ipv6
make
sudo make install
sudo ln -s /usr/local/sbin/xrdp{,-sesman} /usr/sbin
##################################################################
#Step 3 - Download and compiling xorgxrdp packages
##################################################################
cd /tmp
git clone git://github.com/neutrinolabs/xorgxrdp
cd /tmp/xorgxrdp
./bootstrap
./configure
make
sudo make install
##################################################################
#Step 4 - Configure pulseaudio
##################################################################
cd /tmp
mkdir -p pulseaudio
sudo apt-get install -y dpkg-dev
sudo apt-get source pulseaudio
sudo apt-get build-dep pulseaudio
cd /tmp/pulseaudio-10.0
sudo ./configure
cd /tmp/xrdp/sesman/chansrv/pulse
make
sudo cp module-xrdp*.so /usr/lib/pulse-10.0/modules
##################################################################
#Step 5 - Configure of xrdp_keyboard.ini for russian keyboard
##################################################################
sudo dpkg-reconfigure xserver-xorg-legacy
sudo cat > xrdp_keyboard.ini <<EOF
[default_rdp_layouts]
rdp_layout_us=0x00000409
rdp_layout_de=0x00000407
rdp_layout_fr=0x0000040C
rdp_layout_it=0x00000410
rdp_layout_jp=0x00000411
rdp_layout_jp2=0xe0010411
rdp_layout_jp3=0xe0200411
rdp_layout_jp4=0xe0210411
rdp_layout_ru=0x00000419
rdp_layout_se=0x0000041D
rdp_layout_pt=0x00000816
rdp_layout_br=0x00000416
rdp_layout_pl=0x00000415
[rdp_keyboard_ru]
keyboard_type=4
keyboard_type=7
keyboard_subtype=1
model=pc105
options=grp:alt_shift_toggle
rdp_layouts=default_rdp_layouts
layouts_map=layouts_map_ru
[layouts_map_ru]
rdp_layout_us=us,ru
rdp_layout_ru=us,ru
EOF
sudo cp xrdp_keyboard.ini /etc/xrdp
##################################################################
#Step 6 - Configure Polkit to avoid popup in Xrdp Session
##################################################################
sudo cat > 02-allow-colord.conf <<EOF
polkit.addRule(function(action, subject) {
if ((action.id == “org.freedesktop.color-manager.create-device” ||
action.id == “org.freedesktop.color-manager.create-profile” ||
action.id == “org.freedesktop.color-manager.delete-device” ||
action.id == “org.freedesktop.color-manager.delete-profile” ||
action.id == “org.freedesktop.color-manager.modify-device” ||
action.id == “org.freedesktop.color-manager.modify-profile”) &&
subject.isInGroup(“{group}”)) {
return polkit.Result.YES;
}
});
EOF
sudo cp 02-allow-colord.conf /etc/polkit-1/localauthority.conf.d
##################################################################
#Step 7 - Restart Computer
##################################################################
## -- Issue systemctl command to reflect change and enable the service
sudo xrdp-keygen xrdp auto 2048
sudo systemctl daemon-reload
sudo systemctl enable xrdp.service
sudo systemctl enable xrdp-sesman.service
echo "Restart the Computer"
echo "----------------------------"
#sudo shutdown -r now

Сохранить.
$ chmod +x xrdp.sh
$ ./xrdp.sh

Debian 9.3.0 "зависает" на vbox

Нужно запускать так:

PostgreSQL ubuntu temp_tablespaces на отдельный ssd диск

temp_tablespaces = 'NAME_OF_TABLESPACE'
temp_tablespaces = 'temptable' 
Подмонтируем внешний диск на /temptable

$ sudo fdisk -l
Диск /dev/sdb: 232,9 GiB, 250059350016 байтов, 488397168 секторов
Единицы измерения: секторов из 1 * 512 = 512 байтов
Размер сектора (логический/физический): 512 байт / 512 байт
I/O size (minimum/optimal): 512 bytes / 512 bytes
Тип метки диска: gpt
Идентификатор диска: DCE47185-C123-4A16-88F9-0B28131F7055

Устр-во    Start Конец Секторы   Size Тип
/dev/sdb1   2048 488396799 488394752 232,9G Linux filesystem

---------------------------------------------------------------------
Примонтируем пока так:
$ sudo mkdir /temptable
$ sudo mount /dev/sdb1 /temptable -t auto
Сделаем postgres владельцем /temptable
$ sudo chown -R postgres:postgres /temptable

Размонтируем:
$ sudo umount /dev/sdb1
-------------------------------------------------------------------------------------------------------------
 
Автомонтирование по uuid
$ ls -l /dev/disk/by-uuid
итого 0
lrwxrwxrwx 1 root root 10 дек 23 19:21 1f87c952-afe1-45a5-9d50-405f1d054e07 -> ../../sdb1

$ sudo nano /etc/fstab
Добавить:
UUID=1f87c952-afe1-45a5-9d50-405f1d054e07  /temptable ext4 defaults 0 0
Сохранить.
$ sudo reboot

$ sudo -i
# su - postgres
$ psql
psql (9.6.5)
Введите "help", чтобы получить справку.

postgres=# CREATE TABLESPACE temptable LOCATION '/temptable';
CREATE TABLESPACE
postgres=# ctrl+D
$  ctrl+D
$ sudo nano /etc/postgresql/9.6/main/postgresql.conf
Изменить:
temp_tablespaces = 'temptable'          # a list of tablespace names, '' uses

Сохранить

$ sudo reboot




 

Настраиваем 1С Предприятие 7.7 для работы с SQL Server 2000

Настраиваем 1С Предприятие 7.7 для работы с SQL Server 2000
1c 7.7 возможно ли перенести на MS SQL2014 (сейчас 2000)
Секретный релиз платформы v77.27.7
Видео Как установить SQL Server 2000
Свертка базы торговли 7.7 универсальная
 

Определить размер таблиц файловой базы 1С:Предприятие 8.3

Tools for Enterprise8 users
Enterprise 8 tools
1. Скачать файл
2. Разархивировать
3. Запустить Tool_1CD.exe
4. Открыть базу (в папке с копией базы)

 

 Открыть файл базы 1С

Перейти на закладку утилиты

 

 Пример таблица занимает 48 % от максимального.

Настройка postgresql.conf

Настройка postgresql.conf для виртуальной машины RAM = 32 GB по методике
Настройки PostgreSQL для работы с 1С:Предприятием. Часть 2
Память для PostgreSQL выделяем 16 GB

sudo cp /etc/postgresql/9.6/main/postgresql.conf /etc/postgresql/9.6/main/postgresql.conf.bak
sudo nano /etc/postgresql/9.6/main/postgresql.conf 
# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
# "#" anywhere on a line.  The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal.  If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload".  Some
# parameters, which are marked below, require a server shutdown and restart to
# take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on".  Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
#                MB = megabytes                     s   = seconds
#                GB = gigabytes                     min = minutes
#                TB = terabytes                     h   = hours
#                                                   d   = days
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.

data_directory = '/var/lib/postgresql/9.6/main'        # use data in another directory
                    # (change requires restart)
hba_file = '/etc/postgresql/9.6/main/pg_hba.conf'    # host-based authentication file
                    # (change requires restart)
ident_file = '/etc/postgresql/9.6/main/pg_ident.conf'    # ident configuration file
                    # (change requires restart)

# If external_pid_file is not explicitly set, no extra PID file is written.
external_pid_file = '/var/run/postgresql/9.6-main.pid'            # write an extra PID file
                    # (change requires restart)
#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------
# - Connection Settings -
listen_addresses = '*'        # what IP address(es) to listen on;
                    # comma-separated list of addresses;
                    # defaults to 'localhost'; use '*' for all
                    # (change requires restart)
port = 5432                # (change requires restart)
max_connections = 1000            # (change requires restart)
#superuser_reserved_connections = 3    # (change requires restart)
unix_socket_directories = '/var/run/postgresql'    # comma-separated list of directories
                    # (change requires restart)
#unix_socket_group = ''            # (change requires restart)
#unix_socket_permissions = 0777        # begin with 0 to use octal notation
                    # (change requires restart)
#bonjour = off                # advertise server via Bonjour
                    # (change requires restart)
#bonjour_name = ''            # defaults to the computer name
                    # (change requires restart)
# - Security and Authentication -
#authentication_timeout = 1min        # 1s-600s
ssl = false                # (change requires restart)
#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
                    # (change requires restart)
#ssl_prefer_server_ciphers = on        # (change requires restart)
#ssl_ecdh_curve = 'prime256v1'        # (change requires restart)
ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'        # (change requires restart)
ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'        # (change requires restart)
#ssl_ca_file = ''            # (change requires restart)
#ssl_crl_file = ''            # (change requires restart)
#password_encryption = on
#db_user_namespace = off
row_security = off

# GSSAPI using Kerberos
#krb_server_keyfile = ''
#krb_caseins_users = off

# - TCP Keepalives -
# see "man 7 tcp" for details

#tcp_keepalives_idle = 0        # TCP_KEEPIDLE, in seconds;
                    # 0 selects the system default
#tcp_keepalives_interval = 0        # TCP_KEEPINTVL, in seconds;
                    # 0 selects the system default
#tcp_keepalives_count = 0        # TCP_KEEPCNT;
                    # 0 selects the system default


#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------

# - Memory -

shared_buffers = 4GB            # min 128kB
                    # (change requires restart)
#huge_pages = try            # on, off, or try
                    # (change requires restart)
temp_buffers = 256MB            # min 800kB
#max_prepared_transactions = 0        # zero disables the feature
                    # (change requires restart)
# Caution: it is not advisable to set max_prepared_transactions nonzero unless
# you actively intend to use prepared transactions.
work_mem = 128MB            # min 64kB
#maintenance_work_mem = 64MB        # min 1MB
#replacement_sort_tuples = 150000    # limits use of replacement selection sort
#autovacuum_work_mem = -1        # min 1MB, or -1 to use maintenance_work_mem
#max_stack_depth = 2MB            # min 100kB
dynamic_shared_memory_type = posix    # the default is the first option
                    # supported by the operating system:
                    #   posix
                    #   sysv
                    #   windows
                    #   mmap
                    # use none to disable dynamic shared memory
                    # (change requires restart)

# - Disk -

#temp_file_limit = -1            # limits per-process temp file space
                    # in kB, or -1 for no limit

# - Kernel Resource Usage -

max_files_per_process = 1000        # min 25
                    # (change requires restart)
shared_preload_libraries = 'online_analyze, plantuner'    # (change requires restart)

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay = 0            # 0-100 milliseconds
#vacuum_cost_page_hit = 1        # 0-10000 credits
#vacuum_cost_page_miss = 10        # 0-10000 credits
#vacuum_cost_page_dirty = 20        # 0-10000 credits
#vacuum_cost_limit = 200        # 1-10000 credits

# - Background Writer -

bgwriter_delay = 20ms            # 10-10000ms between rounds
bgwriter_lru_maxpages = 400        # 0-1000 max buffers written/round
bgwriter_lru_multiplier = 4.0        # 0-10.0 multiplier on buffers scanned/round
#bgwriter_flush_after = 512kB        # measured in pages, 0 disables

# - Asynchronous Behavior -

effective_io_concurrency = 2        # 1-1000; 0 disables prefetching
#max_worker_processes = 8        # (change requires restart)
#max_parallel_workers_per_gather = 0    # taken from max_worker_processes
#old_snapshot_threshold = -1        # 1min-60d; -1 disables; 0 is immediate
                    # (change requires restart)
#backend_flush_after = 0        # measured in pages, 0 disables


#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------

# - Settings -

#wal_level = minimal            # minimal, replica, or logical
                    # (change requires restart)
fsync = on                # flush data to disk for crash safety
                        # (turning this off can cause
                        # unrecoverable data corruption)
synchronous_commit = off        # synchronization level;
                    # off, local, remote_write, remote_apply, or on
#wal_sync_method = fsync        # the default is the first option
                    # supported by the operating system:
                    #   open_datasync
                    #   fdatasync (default on Linux)
                    #   fsync
                    #   fsync_writethrough
                    #   open_sync
#full_page_writes = on            # recover from partial page writes
#wal_compression = off            # enable compression of full-page writes
#wal_log_hints = off            # also do full page writes of non-critical updates
                    # (change requires restart)
#wal_buffers = -1            # min 32kB, -1 sets based on shared_buffers
                    # (change requires restart)
#wal_writer_delay = 200ms        # 1-10000 milliseconds
#wal_writer_flush_after = 1MB        # measured in pages, 0 disables

commit_delay = 1000            # range 0-100000, in microseconds
commit_siblings = 5            # range 1-1000

# - Checkpoints -

#checkpoint_timeout = 5min        # range 30s-1d
max_wal_size = 8GB
min_wal_size = 4GB
checkpoint_completion_target = 0.5    # checkpoint target duration, 0.0 - 1.0
#checkpoint_flush_after = 256kB        # measured in pages, 0 disables
#checkpoint_warning = 30s        # 0 disables

# - Archiving -

#archive_mode = off        # enables archiving; off, on, or always
                # (change requires restart)
#archive_command = ''        # command to use to archive a logfile segment
                # placeholders: %p = path of file to archive
                #               %f = file name only
                # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
#archive_timeout = 0        # force a logfile segment switch after this
                # number of seconds; 0 disables


#------------------------------------------------------------------------------
# REPLICATION
#------------------------------------------------------------------------------

# - Sending Server(s) -

# Set these on the master and on any standby that will send replication data.

#max_wal_senders = 0        # max number of walsender processes
                # (change requires restart)
#wal_keep_segments = 0        # in logfile segments, 16MB each; 0 disables
#wal_sender_timeout = 60s    # in milliseconds; 0 disables

#max_replication_slots = 0    # max number of replication slots
                # (change requires restart)
#track_commit_timestamp = off    # collect timestamp of transaction commit
                # (change requires restart)

# - Master Server -

# These settings are ignored on a standby server.

#synchronous_standby_names = ''    # standby servers that provide sync rep
                # number of sync standbys and comma-separated list of application_name
                # from standby(s); '*' = all
#vacuum_defer_cleanup_age = 0    # number of xacts by which cleanup is delayed

# - Standby Servers -

# These settings are ignored on a master server.

#hot_standby = off            # "on" allows queries during recovery
                    # (change requires restart)
#max_standby_archive_delay = 30s    # max delay before canceling queries
                    # when reading WAL from archive;
                    # -1 allows indefinite delay
#max_standby_streaming_delay = 30s    # max delay before canceling queries
                    # when reading streaming WAL;
                    # -1 allows indefinite delay
#wal_receiver_status_interval = 10s    # send replies at least this often
                    # 0 disables
#hot_standby_feedback = off        # send info from standby to prevent
                    # query conflicts
#wal_receiver_timeout = 60s        # time that receiver waits for
                    # communication from master
                    # in milliseconds; 0 disables
#wal_retrieve_retry_interval = 5s    # time to wait before retrying to
                    # retrieve WAL after a failed attempt


#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------

# - Planner Method Configuration -

#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_indexonlyscan = on
#enable_material = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on

# - Planner Cost Constants -

#seq_page_cost = 1.0            # measured on an arbitrary scale
random_page_cost = 2.0            # same scale as above
#cpu_tuple_cost = 0.01            # same scale as above
#cpu_index_tuple_cost = 0.005        # same scale as above
#cpu_operator_cost = 0.0025        # same scale as above
#parallel_tuple_cost = 0.1        # same scale as above
#parallel_setup_cost = 1000.0    # same scale as above
#min_parallel_relation_size = 8MB
effective_cache_size = 12GB

# - Genetic Query Optimizer -

#geqo = on
#geqo_threshold = 12
#geqo_effort = 5            # range 1-10
#geqo_pool_size = 0            # selects default based on effort
#geqo_generations = 0            # selects default based on effort
#geqo_selection_bias = 2.0        # range 1.5-2.0
#geqo_seed = 0.0            # range 0.0-1.0

# - Other Planner Options -

#default_statistics_target = 100    # range 1-10000
#constraint_exclusion = partition    # on, off, or partition
#cursor_tuple_fraction = 0.1        # range 0.0-1.0
#from_collapse_limit = 8
#join_collapse_limit = 8        # 1 disables collapsing of explicit
                    # JOIN clauses
#force_parallel_mode = off


#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------

# - Where to Log -

log_destination = 'stderr'        # Valid values are combinations of
                    # stderr, csvlog, syslog, and eventlog,
                    # depending on platform.  csvlog
                    # requires logging_collector to be on.

# This is used when logging to stderr:
logging_collector = on        # Enable capturing of stderr and csvlog
                    # into log files. Required to be on for
                    # csvlogs.
                    # (change requires restart)

# These are only used if logging_collector is on:
log_directory = 'pg_log'        # directory where log files are written,
                    # can be absolute or relative to PGDATA
log_filename = 'postgresql-%a.log'    # log file name pattern,
                    # can include strftime() escapes
#log_file_mode = 0600            # creation mode for log files,
                    # begin with 0 to use octal notation
log_truncate_on_rotation = on        # If on, an existing log file with the
                    # same name as the new log file will be
                    # truncated rather than appended to.
                    # But such truncation only occurs on
                    # time-driven rotation, not on restarts
                    # or size-driven rotation.  Default is
                    # off, meaning append to existing files
                    # in all cases.
log_rotation_age = 1d            # Automatic rotation of logfiles will
                    # happen after that time.  0 disables.
log_rotation_size = 0        # Automatic rotation of logfiles will
                    # happen after that much log output.
                    # 0 disables.

# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'
#syslog_sequence_numbers = on
#syslog_split_messages = on

# This is only relevant when logging to eventlog (win32):
# (change requires restart)
#event_source = 'PostgreSQL'

# - When to Log -

#client_min_messages = notice        # values in order of decreasing detail:
                    #   debug5
                    #   debug4
                    #   debug3
                    #   debug2
                    #   debug1
                    #   log
                    #   notice
                    #   warning
                    #   error

#log_min_messages = warning        # values in order of decreasing detail:
                    #   debug5
                    #   debug4
                    #   debug3
                    #   debug2
                    #   debug1
                    #   info
                    #   notice
                    #   warning
                    #   error
                    #   log
                    #   fatal
                    #   panic

#log_min_error_statement = error    # values in order of decreasing detail:
                    #   debug5
                    #   debug4
                    #   debug3
                    #   debug2
                    #   debug1
                    #   info
                    #   notice
                    #   warning
                    #   error
                    #   log
                    #   fatal
                    #   panic (effectively off)

#log_min_duration_statement = -1    # -1 is disabled, 0 logs all statements
                    # and their durations, > 0 logs only
                    # statements running at least this number
                    # of milliseconds


# - What to Log -

#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = on
#log_checkpoints = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_error_verbosity = default        # terse, default, or verbose messages
#log_hostname = off
log_line_prefix = '%t [%p-%l] %q%u@%d '            # special values:
                    #   %a = application name
                    #   %u = user name
                    #   %d = database name
                    #   %r = remote host and port
                    #   %h = remote host
                    #   %p = process ID
                    #   %t = timestamp without milliseconds
                    #   %m = timestamp with milliseconds
                    #   %n = timestamp with milliseconds (as a Unix epoch)
                    #   %i = command tag
                    #   %e = SQL state
                    #   %c = session ID
                    #   %l = session line number
                    #   %s = session start timestamp
                    #   %v = virtual transaction ID
                    #   %x = transaction ID (0 if none)
                    #   %q = stop here in non-session
                    #        processes
                    #   %% = '%'
                    # e.g. '<%u%%%d> '
#log_lock_waits = off            # log lock waits >= deadlock_timeout
#log_statement = 'none'            # none, ddl, mod, all
#log_replication_commands = off
#log_temp_files = -1            # log temporary files equal or larger
                    # than the specified size in kilobytes;
                    # -1 disables, 0 logs all temp files
log_timezone = 'W-SU'


# - Process Title -

#cluster_name = ''            # added to process titles if nonempty
                    # (change requires restart)
#update_process_title = on


#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------

# - Query/Index Statistics Collector -

#track_activities = on
#track_counts = on
#track_io_timing = off
#track_functions = none            # none, pl, all
#track_activity_query_size = 1024    # (change requires restart)
stats_temp_directory = '/var/run/postgresql/9.6-main.pg_stat_tmp'


# - Statistics Monitoring -

#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off


#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------

autovacuum = on             # Enable autovacuum subprocess?  'on'
                    # requires track_counts to also be on.
#log_autovacuum_min_duration = -1    # -1 disables, 0 logs all actions and
                    # their durations, > 0 logs only
                    # actions running at least this number
                    # of milliseconds.
autovacuum_max_workers = 4        # max number of autovacuum subprocesses
                    # (change requires restart)
autovacuum_naptime = 20s        # time between autovacuum runs
#autovacuum_vacuum_threshold = 50    # min number of row updates before
                    # vacuum
#autovacuum_analyze_threshold = 50    # min number of row updates before
                    # analyze
#autovacuum_vacuum_scale_factor = 0.2    # fraction of table size before vacuum
#autovacuum_analyze_scale_factor = 0.1    # fraction of table size before analyze
#autovacuum_freeze_max_age = 200000000    # maximum XID age before forced vacuum
                    # (change requires restart)
#autovacuum_multixact_freeze_max_age = 400000000    # maximum multixact age
                    # before forced vacuum
                    # (change requires restart)
#autovacuum_vacuum_cost_delay = 20ms    # default vacuum cost delay for
                    # autovacuum, in milliseconds;
                    # -1 means use vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1    # default vacuum cost limit for
                    # autovacuum, -1 means use
                    # vacuum_cost_limit


#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '"$user", public'    # schema names
#default_tablespace = ''        # a tablespace name, '' uses the default
#temp_tablespaces = ''            # a list of tablespace names, '' uses
                    # only default tablespace
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#default_transaction_deferrable = off
#session_replication_role = 'origin'
#statement_timeout = 0            # in milliseconds, 0 is disabled
#lock_timeout = 0            # in milliseconds, 0 is disabled
#idle_in_transaction_session_timeout = 0        # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#vacuum_multixact_freeze_min_age = 5000000
#vacuum_multixact_freeze_table_age = 150000000
#bytea_output = 'hex'            # hex, escape
#xmlbinary = 'base64'
#xmloption = 'content'
#gin_fuzzy_search_limit = 0
#gin_pending_list_limit = 4MB

# - Locale and Formatting -

datestyle = 'iso, dmy'
#intervalstyle = 'postgres'
timezone = 'W-SU'
#timezone_abbreviations = 'Default'     # Select the set of available time zone
                    # abbreviations.  Currently, there are
                    #   Default
                    #   Australia (historical usage)
                    #   India
                    # You can create your own file in
                    # share/timezonesets/.
#extra_float_digits = 0            # min -15, max 3
#client_encoding = sql_ascii        # actually, defaults to database
                    # encoding

# These settings are initialized by initdb, but they can be changed.
lc_messages = 'ru_RU.UTF-8'            # locale for system error message
                    # strings
lc_monetary = 'ru_RU.UTF-8'            # locale for monetary formatting
lc_numeric = 'ru_RU.UTF-8'            # locale for number formatting
lc_time = 'ru_RU.UTF-8'                # locale for time formatting

# default configuration for text search
default_text_search_config = 'pg_catalog.russian'

# - Other Defaults -

#dynamic_library_path = '$libdir'
#local_preload_libraries = ''
#session_preload_libraries = ''


#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------

#deadlock_timeout = 1s
max_locks_per_transaction = 256    # min 10
                    # (change requires restart)
#max_pred_locks_per_transaction = 64    # min 10
                    # (change requires restart)


#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------

# - Previous PostgreSQL Versions -

#array_nulls = on
#backslash_quote = safe_encoding    # on, off, or safe_encoding
#default_with_oids = off
escape_string_warning = off
#lo_compat_privileges = off
#operator_precedence_warning = off
#quote_all_identifiers = off
#sql_inheritance = on
standard_conforming_strings = off
#synchronize_seqscans = on

# - Other Platforms and Clients -

#transform_null_equals = off


#------------------------------------------------------------------------------
# ERROR HANDLING
#------------------------------------------------------------------------------

#exit_on_error = off            # terminate session on any error?
#restart_after_crash = on        # reinitialize after backend crash?


#------------------------------------------------------------------------------
# CONFIG FILE INCLUDES
#------------------------------------------------------------------------------

# These options allow settings to be loaded from files other than the
# default postgresql.conf.

#include_dir = 'conf.d'            # include files ending in '.conf' from
                    # directory 'conf.d'
#include_if_exists = 'exists.conf'    # include file only if it exists
#include = 'special.conf'        # include file


#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------

online_analyze.threshold = 50
online_analyze.scale_factor = 0.1
online_analyze.enable = on
online_analyze.verbose = off
online_analyze.local_tracking = on
online_analyze.min_interval = 10000
online_analyze.table_type = 'all'

1C + PostgreSQL: Изменение табличного пространства